OrthoMark® - OM-1012
The small clamp base, fully adjustable X-ray magnification marker is designed for use with all orthopedic and veterinary surgical templating software.
- Clamp - 2" jaws
- Arm length: 24"
- Weight: 13oz
- Ball: 25.4mm/1" Stainless
The small clamp base Model OM-1012 is designed for use on any clampable surface, flat or round, up to 2” thick, but works best on round surfaces with a maximum thickness of 1.5". It works especially well when attached to patient grab handles, or step stool and elevated stair handles.
When using, simply position and tighten. When attaching to a round surface, position the V notch on the fixed side of the clamp where you intend to clamp, use the T-handle to tighten. This is a strong clamp, so don't overtighten.
Position the sphere normally afterward.
The small clamp base, fully adjustable X-ray magnification marker is designed for use with all orthopedic and veterinary surgical templating software.
- Clamp - 2" jaws
- Arm length: 24"
- Weight: 13oz
- Ball: 25.4mm/1" Stainless
The small clamp base Model OM-1012 is designed for use on any clampable surface, flat or round, up to 2” thick, but works best on round surfaces with a maximum thickness of 1.5". It works especially well when attached to patient grab handles, or step stool and elevated stair handles.
When using, simply position and tighten. When attaching to a round surface, position the V notch on the fixed side of the clamp where you intend to clamp, use the T-handle to tighten. This is a strong clamp, so don't overtighten.
Position the sphere normally afterward.
| SKU | OM-1012 |
|---|---|
| Shipping Method | UPS |
| Warranty | 1 year for Manufacturer Defects |
| Condition | New |
| Special Price | $196.00 |
| International Shipping | No |