15 Degree Wedge Set Positioner - Closed Cell

Z&Z Medical’s Exclusive Closed Cell Sponges are made from a lightweight 100% radiolucent non-porous foam. These positioning sponges are entirely fluid resistant and easy to clean! They are also easy to disinfect with any hospital grade disinfectant and are extremely durable when compared to common open cell sponges on the market today! Our sponges feature a non-coated premium charcoal grey color and are the perfect solution for any positioning need! They can be used in MRI, CT, Nuc Med, Ultrasound and General X-Ray making them the number one option in positioning sponges.  Below are some common frequently asked questions about our new closed cell sponges.

Frequently Asked Questions About Closed Cell Foam:

1. Most imaging facilities require coated sponges or vinyl covered so that they can be cleaned and meet Joint Commission Standards. Do closed cell sponges have a coating? Closed cell sponges do not need a protective coating. The foam itself is closed cell and non-porous, meaning it will not absorb any fluids unlike the un-coated open cell sponges that are on the market. The crosslink density of this foam is extremely high, and the surface can be easily cleaned & disinfected making them an excellent positioner for any imaging facility.

2. Why buy closed cell instead of coated or vinyl covered sponges? Closed cell sponges offer excellent support during positioning without the worry of artifacts that are common with coated sponges. No more worrying about repeats due to artifacts. They are easy to clean, very durable and often cost less than coated sponges. They maintain stiffness over time unlike coated or vinyl covered sponges.

3. Will these sponges show artifacts under x-ray? No. Closed cell sponges are radiolucent allowing the x-ray to pass right through and not be blocked and there is no chemical coating that will artifact during imaging. When used under normal imaging technique, our sponges offer superior image radiolucency and no artifacts.

4. Can I clean closed cell sponges? Absolutely. To clean the surface of the sponge that has become dirty or dusty with normal use and with storage, we recommend that you wash the surface with cold water and a mild general-purpose soap like a 409 spray. We recommend that you avoid using detergent cleaners that contain hydrocarbon solvents like acetone or ammonia as they are harsh on the surface and will shorten the life of your sponge. We also recommend that you avoid rigorous scrubbing, abrasive pads, or stiff brushes as they can also damage the surface as it would with any foam product.

5. Can I disinfect closed cell sponges in between patients? Absolutely. To disinfect sponges in between patients or for positioners that have become soiled with blood, bodily fluids, barium, betadine, or other fluids, we recommend the use of hospital approved disinfectant wipe or spray. Please allow for the manufacturers recommended drying time in between patients. A 10% Bleach solution can also be used as a disinfectant if the manufactures guidelines are strictly followed. Please do NOT autoclave, steam, soak, launder or submerge in water.

6. Why do closed cell sponges sometimes have a scuffed looking appearance? Closed cell foam uses a different manufacturing process than does open cell non coated sponges or coated sponges. Open cell sponges are NOT cleanable, and the surfaces are often deceiving. Coated sponges have a chemical solution applied to the top of the open cell sponge creating a smooth barrier. Since closed cell foam positioners do not need a coating to be cleaned, the outer layer can show surface marks during the manufacturing process. We ONLY sell new sponges. Rest assured we never sell used sponges.
CLOSED CELL FOAM POSITIONERS

7. Are there any special storage requirements for closed cell foam? No. Unlike non-coated foam that will change color with exposure to room light, closed cell foam is not affected by room light. We recommend that you store your sponges in a clean dry area when not in use to prolong the life of your sponges and to keep them clean.

8. What is the warranty on closed cell foam positioners? Closed cell foam products are designed to provide aid to the technologist when positioning a patient, and comfort for the patient during imaging procedures. The surface provides a barrier that can be cleaned in between patients. If the foam product is punctured or torn, this barrier still provides a barrier of protection for infection control as the crosslink polyethylene foam is non-porous and still resistant to fluids even if punctured or torn. Because of the nature of foam products, there is a 30-day manufacturing warranty to be free from defects in material and workmanship under normal use. Warranty does not cover damage from misuse, mishandling or neglect.  

Have a question about closed cell sponges or want more information? Email our customer service team at info@zzmedical.com   Please visit our easy to use e-commerce website at www.zzmedical.com to see the many Closed Cell Sponges and kits that we now offer.   

Z&Z Medical’s Exclusive Closed Cell Sponges are made from a lightweight 100% radiolucent non-porous foam. These positioning sponges are entirely fluid resistant and easy to clean! They are also easy to disinfect with any hospital grade disinfectant and are extremely durable when compared to common open cell sponges on the market today! Our sponges feature a non-coated premium charcoal grey color and are the perfect solution for any positioning need! They can be used in MRI, CT, Nuc Med, Ultrasound and General X-Ray making them the number one option in positioning sponges.  Below are some common frequently asked questions about our new closed cell sponges.

1. Are there any special storage requirements for closed cell foam? No. Unlike non-coated foam that will change color with exposure to room light, closed cell foam is not affected by room light.  We recommend that you store your sponges in a clean dry area when not in use to prolong the life of your sponges and to keep them clean.
2. Are closed cell foam positioners easy to rip or tear?Unlike coated open cell foam positioners, closed cell foam is manufactured using a fine micro-cellular structure that is characterized by its firm feel. They have a much higher tensile and tear strength compared to the open cell foam positioners on the market today. Unlike coated foam products that have to be replaced if torn or punctured for infection control reasons, this does not apply to closed cell foam products as the crosslink polyethylene foam is non-porous and resistant to fluid even if punctured or torn. 
3. I’m worried about cleaning them since they are not coated. Should I be worried? No. Closed cell sponges do not need a protective coating. The foam itself is closed cell and non-porous, meaning it will not absorb any fluids unlike the un-coated open cell sponges that are on the market. The crosslink density of this foam is extremely high, and the surface can be easily cleaned & disinfected making them an excellent positioner for any imaging facility.    

Have a question about closed cell sponges or want more information? Email our customer service team at info@zzmedical.com   Please visit our easy to use e-commerce website at www.zzmedical.com to see the many Closed Cell Sponges and kits that we now offer.   

Z&Z Medical’s Exclusive Closed Cell Sponges are made from a lightweight 100% radiolucent non-porous foam. These positioning sponges are entirely fluid resistant and easy to clean! They are also easy to disinfect with any hospital grade disinfectant and are extremely durable when compared to common open cell sponges on the market today! Our sponges feature a non-coated premium charcoal grey color and are the perfect solution for any positioning need! They can be used in MRI, CT, Nuc Med, Ultrasound and General X-Ray making them the number one option in positioning sponges.  Below are some common frequently asked questions about our new closed cell sponges.

1. Are there any special storage requirements for closed cell foam? No. Unlike non-coated foam that will change color with exposure to room light, closed cell foam is not affected by room light.  We recommend that you store your sponges in a clean dry area when not in use to prolong the life of your sponges and to keep them clean.
2. Are closed cell foam positioners easy to rip or tear?Unlike coated open cell foam positioners, closed cell foam is manufactured using a fine micro-cellular structure that is characterized by its firm feel. They have a much higher tensile and tear strength compared to the open cell foam positioners on the market today. Unlike coated foam products that have to be replaced if torn or punctured for infection control reasons, this does not apply to closed cell foam products as the crosslink polyethylene foam is non-porous and resistant to fluid even if punctured or torn. 
3. I’m worried about cleaning them since they are not coated. Should I be worried? No. Closed cell sponges do not need a protective coating. The foam itself is closed cell and non-porous, meaning it will not absorb any fluids unlike the un-coated open cell sponges that are on the market. The crosslink density of this foam is extremely high, and the surface can be easily cleaned & disinfected making them an excellent positioner for any imaging facility.    

Have a question about closed cell sponges or want more information? Email our customer service team at info@zzmedical.com   Please visit our easy to use e-commerce website at www.zzmedical.com to see the many Closed Cell Sponges and kits that we now offer.   

Can I clean closed cell sponges? Absolutely. To clean the surface of the sponge that has become dirty or dusty with normal use and with storage, we recommend that you wash the surface with cold water and a mild general-purpose soap like a 409 spray. We recommend that you avoid using detergent cleaners that contain hydrocarbon solvents like acetone or ammonia as they are harsh on the surface and will shorten the life of your sponge. We also recommend that you avoid rigorous scrubbing, abrasive pads, or stiff brushes as they can also damage the surface as it would with any foam product.

Most imaging facilities require coated sponges or vinyl covered so that they can be cleaned and meet Joint Commission Standards. Do closed cell sponges have a coating? Closed cell sponges do not need a protective coating.  The foam itself is closed cell and non-porous, meaning it will not absorb any fluids unlike the un-coated open cell sponges that are on the market. The crosslink density of this foam is extremely high, and the surface can be easily cleaned & disinfected making them an excellent positioner for any imaging facility.     

To learn more about these amazing X-ray Positioning Sponges or to place an order, visit our website. www.zzmedical.com to learn more. Customer Service is always available to answer any questions that you may have. You can email them at info@zzmedical.com .

Z&Z Medical has an array of shapes and sizes to meet a wide range of imaging                    applications. PLUS they are in stock and ship in just 24 hours! These Innovative Closed Cell Sponges are Exclusive Products of Z&Z Medical. We are extremely proud to introduce these to the medical imaging community and are absolutely sure that once you try them, they will be your favorite sponges!  Artifact-free, 100% Cleanable and Durable. These innovative Closed Cell Sponges are making a major impact in the technologist community and in every imaging department. Order your set today!

If you haven’t noticed already, Z&Z Medical is committed to working with X-Ray Facilities to offer the best products at the best prices. And when we had the opportunity to improve upon an industry standard and provide an even better product—we jumped at the opportunity!  You will LOVE our new Closed Cell Foam Positioners. Radiolucent, Artifact-Free and 100% Cleanable!  Who could ask for anything more? Z&Z Medical has an array of shapes and sizes to meet a wide range of imaging applications. PLUS they are in stock and ship in just 24 hours!

1. They are Artifact Free! For most technologists, this is the only selling point you’ll need. Eliminating artifacts on the x-ray image is one of the most important reasons to replace all your sponges today. No longer do you have to accept artifacts as something you have to live with. Z&Z Medical’s innovation in foam closed cell technology has provided an opportunity to now own Closed Cell Foam Positioners that are truly artifact free– Guaranteed! 
2. They are 100% Cleanable! Technologist have no more worries about how to clean their sponges or having sponges that would pass the rigorous inspections of Joint Commission or State Inspectors.  Our Closed Cell Sponge Positioners give you the best of both worlds!.  There are no artifacts and they are easy to clean and disinfect with 10% bleach solution or any hospital grade  disinfectant wipe or spray after every use.
3. They are Durable! In addition to being artifact-free and easy to disinfect, there is the added benefit of being durable. They are sturdy to ensure patient stability and unlike coated or vinyl covered sponges, they do not have a covering that is easy to rip or tear. They are manufactured with a fine micro-cellular structure that is characterized by its firm feel and has a higher tensile and tear strength compared to any other foam material on the market.

These Innovative Closed Cell Sponges are Exclusive Products of Z&Z Medical. We are       extremely proud to introduce these to the medical imaging community and are absolutely sure that once you try them, they will be your favorite sponges!  Artifact-free, 100% Cleanable and Durable. These innovative Closed Cell Sponges are making a major impact in the technologist community and in every imaging department. Order your set today!

Great Question!  Closed Cell Sponges are not like any other sponge positioner on the market. The innovative technology makes these sponges durable, 100% cleanable, and YES – Artifact-Free!

As any technologist knows, positioning sponges are essential for positioning patients for the best image possible. Patients come to the imaging departments for a wide variety of reasons, and you have to be ready for all situations. Positioning sponges do just that and aide technologist in getting the right angle or the right position for the imaging exam when it’s needed most.

It’s important to have the right sponges that are 100% cleanable and  don’t create artifacts on the image.  Closed Cell Positioners do just that!  No more worries about repeat examinations due to artifacts. No more worries about being able to clean them either. Their micro-cellular structure is resistant to ALL FLUIDS including blood, urine, betadine, IV solutions, etc.  Our innovative Closed Cell Sponge Positioners give you the best of both worlds!  There are easy to clean & disinfect with a 10% bleach solution or any hospital grade disinfectant wipe or spray AND they are artifact-free.

These radiolucent closed cell sponge positioners are manufactured using a fine micro-cellular structure that is characterized by a firm feel and resistant to fluids.  Since there is no chemical coating – there is no horrible line artifacts.  Now you see why we’re so excited to tell you about our artifact-free positioning sponges and here are three reasons why you’ll love them too!

1. Artifact Free
2. 100% Cleanable with any medical grade disinfectant or 10% bleach solution.
3. Extremely durable

We are extremely proud to introduce these to the medical imaging community and are sure that once you try them, they will be your favorite sponges!  Artifact-free, 100% Cleanable and Durable. These innovative Closed Cell Sponges are making a major impact in the technologist community and in every imaging  department.  Take a look at our product offerings today and update your department with these amazing Closed Cell Foam Positioning Sponges!     Have a question? Email our customer service team at info@zzmedical.com or visit our website www.zzmedical.com and engage in our Live Chat Feature.

Great Question!  Closed Cell Sponges are not like any other sponge positioner on the market. The innovative technology makes these sponges more durable than ever.

Technologists have no more worries about whether their sponges will pass the rigorous inspections of Joint Commission or State Inspectors.  In the past, the older non-coated gray sponges were easy to tear and impossible to clean Coated sponges are easy to clean but are easy to rip and tear making them a huge risk for infection control.  Our innovative Closed Cell Sponge Positioners give you the best of both worlds!  There are easy to clean & disinfect with a 10% bleach solution or any hospital grade disinfectant wipe or spray AND they are extremely durable.

These closed cell sponge positioners are manufactured using a fine micro-cellular structure that is characterized by a firm feel and resistant to fluids. This makes them super easy to clean! Now you see why we’re so excited to tell you about our artifact-free positioning sponges and here are three reasons why you’ll love them too!

1. Extremely durable
2. 100% Cleanable with any medical grade disinfectant or 10% bleach solution.
3. Artifact Free.

So, when would you need to replace them?  If your closed cell sponge has become damaged or town like the example shown below, it is time to replace them. Damaged sponges, while still fluid resistant, are not able to be thoroughly cleaned and sanitized. PLUS – the appearance can give your department a bad wrap with an impression that you simply don’t care.  The good news is these positioners are very economical and ship quickly. Take a look at our Closed Cell Products today and update your department with these amazing Closed Cell Foam Positioning Sponges!                   

Patient comfort is becoming a higher priority for hospitals, and the reasons are three-fold: It boosts patient satisfaction, improves outcomes and is the right thing to do. Radiology Professionals understand that comfort before, during, and after an examination is important for both the patient and for good image quality, and many health care manufacturers have boosted their efforts to create equipment and accessories that make the patient experience more comfortable. There are three primary reasons that those in Medical Imaging should focus on patient comfort and care. First, if a patient is comfortable, they are more likely to hold still, therefore facilitating a better diagnostic image and less repeats. Second, patients who are made more comfortable during their care are imaged more quickly which increases the throughput in a room. Third, a patient who has a good experience is more likely to come back to the imaging center when they need additional care or tell others about how caring the facility was.

Imaging Departments are increasingly recognizing the connection between patient comfort and business success is more than just having state-of-the-art equipment. Having imaging related products that provide stability and comfort for the patient are extremely important and products that meet infection control guidelines are just as important. Having products in the department that improve patient satisfaction and don’t interfere with imaging is always a win win situation. Z&Z Medical is proud to promote two of our Z&Z Medical Exclusive Products:

• Our Coated Premium Table Pad
• Closed Cell Foam Positioners

There are a number of reasons to restock your facilities with better and updated patient handling accessories. The condition of your accessories says a lot about how you run things. Are your table pads frayed or stained? Not only does this affect their appearance (which your patients will notice) but it could also affect their usefulness. Having something as simple as a new table pad in your facility not only helps project the right image about the care you offer, it also gives you the opportunity to make your patients more comfortable.

Premium Table Pads - Radiology table pads have come a long way in recent years. They're more comfortable for your patients and more durable, giving them a much longer shelf life of effectiveness in your facility. Our premium table pads are also radiolucent. Increased patient comfort and less artifacts in images are two things that every facility strives for.

Closed Cell Artifact Free Sponges - Perhaps the biggest leap forward in patient handling accessories to hit the market lately are our Closed Cell Artifact Free Sponges. Outdated sponges were causing too many problems for technologists. They’re also easy to clean and will provide great comfort and stability to your patients during procedures.

All the Positioning Aids You’ll Ever Need - Sponges and table pads are really just the tip of the iceberg for your patient handling accessories here at Z&Z Medical. Our patient positioning sandbags offerings are vast, covering every type of patient and procedure that you’ll encounter on a daily basis, from MRI to X-ray imaging. Our patient immobilizers will give you an unparalleled level of control while still ensuring that your patients are comfortable and stable.

The condition of your accessories speaks volumes about your level of patient care. Make sure that you’re sending the message that you care about your patients. If you have old, outdated or worn-out patient handling accessories, it’s time to step up your game today. Come view new and updated imaging accessories today on our website at www.zzmedical.com and learn more about what we can do to make your job a little bit easier. 

Z&Z Medical’s Exclusive Closed Cell Sponges are made from a lightweight 100% radiolucent non-porous foam. These positioning sponges are entirely fluid resistant and easy to clean! They are also easy to disinfect with any hospital grade disinfectant and are extremely durable when compared to common open cell sponges on the market today! Our sponges feature a non-coated premium charcoal grey color and are the perfect solution for any positioning need! They can be used in MRI, CT, Nuc Med, Ultrasound and General X-Ray making them the number one option in positioning sponges.  Below are some common frequently asked questions about our new closed cell sponges.

1. Are there any special storage requirements for closed cell foam? No. Unlike non-coated foam that will change color with exposure to room light, closed cell foam is not affected by room light.  We recommend that you store your sponges in a clean dry area when not in use to prolong the life of your sponges and to keep them clean.
2. Are closed cell foam positioners easy to rip or tear?Unlike coated open cell foam positioners, closed cell foam is manufactured using a fine micro-cellular structure that is characterized by its firm feel. They have a much higher tensile and tear strength compared to the open cell foam positioners on the market today. Unlike coated foam products that have to be replaced if torn or punctured for infection control reasons, this does not apply to closed cell foam products as the crosslink polyethylene foam is non-porous and resistant to fluid even if punctured or torn. 
3. I’m worried about cleaning them since they are not coated. Should I be worried? No. Closed cell sponges do not need a protective coating. The foam itself is closed cell and non-porous, meaning it will not absorb any fluids unlike the un-coated open cell sponges that are on the market. The crosslink density of this foam is extremely high, and the surface can be easily cleaned & disinfected making them an excellent positioner for any imaging facility.    

Have a question about closed cell sponges or want more information? Email our customer service team at info@zzmedical.com   Please visit our easy to use e-commerce website at www.zzmedical.com to see the many Closed Cell Sponges and kits that we now offer.   

Z&Z Medical’s Exclusive Closed Cell Sponges are made from a lightweight 100% radiolucent non-porous foam. These positioning sponges are entirely fluid resistant and easy to clean! They are also easy to disinfect with any hospital grade disinfectant and are extremely durable when compared to common open cell sponges on the market today! Our sponges feature a non-coated premium charcoal grey color and are the perfect solution for any positioning need! They can be used in MRI, CT, Nuc Med, Ultrasound and General X-Ray making them the number one option in positioning sponges.  Below are some common frequently asked questions about our new closed cell sponges.

Today’s featured product is Z&Z Medical’s Exclusive Closed Cell Sponges. They are perfect for positioning patients in MRI, CT, Nuc Med, Ultrasound, and General X-ray. They are cleanable and radiolucent!  Two “must-have: properties for any positioning sponge. Foam Positioners are changing, and we’re proud to be leading the way!