Frequently Asked Questions About Coated Foam Positioners:
Z&Z Medical’s N-Visi-RAY Coated Sponges are manufactured using a high density polyurethane foam that is supportive and comfortable for patients. They feature a patented medical grade, fluid-resistant coated surface that is easy to clean with any medical grade disinfectant wipe or spray. Coated positioners are non-returnable once opened from packaging.
Frequently Asked Questions About Coated Foam Positioners:
1. I need to replace my old worn-out torn sponges, but I know we can’t have those open cell grey sponges. What should we choose for replacements? We highly recommend Z&Z Medical New N-Visi-Ray Coated Foam Positioners. These black coated sponges are manufactured with a high density polyurethane foam that is radiolucent, and easy to clean! They are manufactured right here in the USA and make the best durable positioning aides that hold up better over time.
2. Some coated sponges that we have gotten in the past tear or peel easily as the coating is so thin. What do you suggest as a good “CLEANABLE” sponge replacement that will hold up over time? Good question! The medical grade coating that is used on the N-Visi-Ray coated sponges contain active plasticizers that will not dry out or crack easily over time. The coated surface does not peel off or tear like other coated sponges on the market. This patented medical grade fluid resistant coating is also easy to clean and disinfect.
3. We had to replace some sponges and we got coated sponges – but they show bad artifacts. Do your coated sponges show artifacts? The new N-Visi-Ray Black Coated Sponges have a unique design and are manufactured with a patented flared angle that significantly reduces artifacts during x-ray imaging. The flared sides increase the overall size of a standard non-flared sponge but does not affect imaging or positioning. This unique flare adds to the radiolucency of the sponge and minimizes the shadowing. While these sponges are radiolucent, some positioners may present shadowing along the edges of the positioners, but you will not see those stark line artifacts that are often seen with other coated sponges
4. What sponges can we get that is cleanable and will pass inspections from a quality control standpoint? We recommend Z&Z Medical N-Visi-Ray Coated Sponges. These positioners are amazing. They are 100% cleanable and do not show line artifacts . These sponges are also radiolucent allowing the x-ray to pass right through. When used under normal imaging technique, our sponges offer superior image radiolucency and no artifacts.
5. We need to replace our sponges but have to use a medical grade disinfectant spray to clean them with. What sponge replacement do you recommend? We recommend N-Visi-Ray Black Coated Sponges. The surface can easily be disinfected after every patient with a hospital grade medical disinfectant or 10% bleach solution.
6. Are your N-Visi-Ray Sponges Comfortable for Patients AND support them during imaging? We bought some sponges that are so flimsy they will not even support our patients. Absolutely! In addition to the high quality of these sponges and them being artifact-free, there is the added benefit of these positioning aids providing a nice level of comfort to patients while still being sturdy enough to ensure a patient’s stability during positioning.
7. Why are N-Visi-Ray coated sponges black? These unique sponges are coated in black to maximize their durability and to provide a surface that is easy to clean. Plus it’s a neutral color that will blend in with other accessories in the imaging department.
8. How do I clean your coated sponges? The sponges look dirty even after we have just cleaned them due to the light color. The N-Visi-Ray Coated sponges use a black coating that is difficult to see any blemishes over time. To clean the surface of the sponge that has become dirty or dusty with normal use and with storage, we recommend that you wash the surface with cold water and a mild general-purpose soap like a 409 spray. We recommend that you avoid using detergent cleaners that contain hydrocarbon solvents like acetone or ammonia as they are harsh on the surface and will shorten the life of your sponge. We also recommend that you avoid rigorous scrubbing, abrasive pads, or stiff brushes as they can also damage the surface as it would with any foam product.
9.Can I disinfect coated sponges in between patients? Absolutely. Todisinfect sponges in between patients or for positioners that have becomesoiled with blood, bodily fluids, barium, betadine, or other fluids, werecommend the use of hospital approved disinfectant wipe or spray. Pleaseallow for the manufacturers recommended drying time in betweenpatients. A 10% Bleach solution can also be used as a disinfectant if themanufacturers guidelines are strictly followed. Please do NOT autoclave,steam, soak, launder or submerge in water.
10.Are there any special storage requirements for coated foam? Our lightcolored sponges in the past turn an ugly yellow or grey over time. No.Unlike non-coated foam that will change color with exposure to room light,coated foam is not affected by room light. We recommend that you storeyour sponges in a clean dry area when not in use to prolong the life of yoursponges and to keep them clean.
11.What is the warranty on coated foam positioners? Because of the natureof foam products, there is a 30-day manufacturing warranty to be free from defects in material and workmanship under normal use. Warranty does notcover damage from misuse, mishandling or neglect.
To Purchase N-Visi-Ray Coated Foam Sponge Positioners visit our website www.zzmedical.com
